The GS Field Holder is designed to store three Shapton GlassStones neatly. When turned over, it can also be used as a sharpening base.

Dimensions: 253 x 80 x 53mm

Weight: approx. 640g

Accessories Information

The GlassStone series of sharpening stones uses a revolutionary design to provide great usability within a thin package formed from a combination of glass layers. The conventional image is that sharpening stones are large and heavy, but GlassStones are not only thin and light, but also strong, as layers of tempered glass are stuck together. GlassStones therefore have strong resistance to cracking or sudden breakage caused by external shocks such as being dropped.

Shapton stones do not need to be soaked except the very first time after purchase. We do recommend that on first use, you pre-soak the stone in water for five to six minutes to secure even smoother sharpening. Shapton stones do not need a Nagura Stone, and lapping with a Nagura Stone will leave the surface rough and ragged.

• Overall size: 210 x 70 x 10mm
• Abrasive layer: 5mm
• Micron: 4.9
• Mesh: 3000
• 360g

Accessories Information

Heavy duty, sturdy rubber-based whetstone holder. 
– Sturdy stainless steel and rubber construction 
– Heavy Duty Locking Screw
– Holds stones from 73mm to 218mm in length

– Weight: 577g

Accessories Information

This 1000/4000 kit is the perfect maintenance bundle for keeping both carbon and stainless knives in top condition. A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.  

• Size: 210 x 75 x 26mm
• 840g

Accessories Information

This 500/1000/4000 kit is the perfect bundle to move more stubborn steels like SG2 or HAP40, or for minor chip repairs, as well as for keeping both carbon and stainless knives in top condition. A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.  

• Size: 210 x 75 x 26mm
• 840g

Accessories Information

This 500/1000/4000/6000 kit is the perfect bundle to move more stubborn steels like SG2 or HAP40, or for minor chip repairs, as well as for taking carbon and stainless edges to a more refined 6000 finish. A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.  

• Size: 210 x 75 x 26mm
• 840g

The Chocera are one of Naniwa's premium whetstone offerings. Similar to the Shapton Glass but with better feedback, albeit a slightly faster wear rate. A thick, firm, high-end stone perfect for all steel stypes and applications.

Dimensions of stone - 210 x 70 x 20

Made In Japan

An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.

Dimensions of stone - 210 x 70 x 10mm

Made In Japan

Accessory Information

The Atoma Diamond Lapping Plates by Tsuboman Japan are widely recognised as the superior solution for flattening your whetstones. Strong, sturdy, and weighing in at 600g, these will make light work of even the hardest stones.

– Low 140 Grit for very fast removal of stone surface
– Replaceable abrasive sheet

Specifications

*Knife Not Included* This thoughtfully crafted holder is made from Walnut wood and allows you to easily and safely store your knives on a benchtop with a small footprint, whilst being able to see the blades through the open-sided design.

Before purchasing please ensure your knives will fit with the provided dimensions. Knives that are thicker, longer, or taller than the provided dimensions will not fit in the holder. Chefs Edge will not accept responsibility if your knives don't fit in the holder. 

Inner void for knife: 4mm wide x 65mm deep x 225mm high.

Total exterior measurements: 80mm wide x 130mm deep x 265mm high.

Specifications

01 Silver is built with a single tablespoon volume (half ounce) to scale recipes and ratios with consistency. The well is deeply formed to cradle liquid, the tip is tapered to a fine point for precise pouring or basting. The handle is long enough to stir a braise or a pot of beans, and nimble enough to sauce a plate. The lip is thin and flared to help scrape the corners of a pan or storage container.

Form-
Inspired by the worn and tarnished steel often found at flea markets, and modeled after old American and European silhouettes the spoon is tumbled and unpolished. This creates a matte and imperfect material finish. Each piece is stamped and etched, then finished by hand on a lathe in Mr. Okada’s workshop.

Origin-
Niigata, Japan

Material-
18/10 Japanese stainless steel

Length-
9 inches

Cleaning-
Hand-wash only, please.

Packaging-
Packaging is constructed with recycled chipboard