Sort by:
1548 products
1548 products
Accessories Information
– Plastic blade guard with felt lining
– 18cm length, 5.5cm height
– Most suited to 15-17cm chef knives
Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.
*Logo may vary from item pictured*
Accessories Information
One of the best whetstone holders money can buy. Heavy duty, sturdy, and of the highest quality.
– Sturdy stainless steel and rubber construction
– Heavy Duty Locking Screw
– Holds stones from 150mm to 250mm in length
The Maple Magnetic Knife Holder is a minimal and elegant knife display and storage solution for those who may not have room for bulky knife blocks that take up vital bench space.
– Maple timber construction
– Strong adhesive strips runs along entire back of holder, or hang with 2 screws
– Powerful Neodymium Magnets
– 40cm L x 2cm W x 6.5cm H
- Knives not included
Adhesive Strip installation information; ensure wall is level and free of oil or dirt prior to the use of adhesive strips
*Chefs Edge is not liable for any damage caused to knives or property while using the magnetic holder*
Lightweight heavy duty PVC pouch with 2 tie up straps for storing up to 10 chef tools,
Not for storing knives.
Interior storage space: 370mm wide x 245mm tall
Pocket depth: 110mm
Smallest pocket width approx: 22mm
Largest pocket width approx: 42mm
*Chef tools not included
*Available to Australian customers only*
Specifications
Style: | Nakiri |
Blade Length: | 180mm |
Weight: | 195g |
Blade Material: | AUS10 w/Stainless Clad |
Handle Material: | Pakkawood w/stainless bolster |
HRC: | 58-59 |
Accessories Information
Includes
- Yoshoku 1000/6000 Grit Deluxe Combination Stone (soak for 5-10 minutes before use)
- Approx. stone dimensions: 180mm x 60mm x 30mm
- Guide Clip (Consider applying masking tape to the knife to reduce potential risk of scratching)
- Nagura Stone (flattening stone)
- Bamboo holder with rubber nonslip base
- Best paired with a lapping stone/plate for flatting between use
- Entry level stone
Knife Information
A classy, cleverly designed steak knife set made by Suncraft in Japan. The 2 alternating types of serrations make for easy cutting of steaks.
Style: | Steak Knife |
Blade Length: | 130mm |
Weight: | 113g |
Blade Material: | Stainless Steel |
*Available to Australian customers only*
Specifications
Style: | Slicer |
Blade Length: | 240mm |
Weight: | 170g |
Blade Material: | AUS10 w/Stainless Clad |
Handle Material: | Pakkawood w/stainless bolster |
HRC: | 58-59 |
Knife Information
Who doesn't want a whale knife? Hand-forged carbon steel with soft iron clad. A perfect utility/chopper with great edge retention.
STEEL BREAKDOWN – Blue Steel is a traditional high-carbon steel made by Hitachi Metals in Japan. It is the favourite steel of many knife makers and chefs across the world for its fantastic edge holding ability, toughness, and ease of sharpening. It contains few stainless elements, and as such will develop a patina, and develop rust spots if left wet after use. It requires a little more care and maintenance than something like VG-10 (Stainless Steel), so consider this when purchasing a Blue Steel knife as your first Japanese knife.
Specifications
Style: | Utility |
Edge Length: | 62mm |
We cannot fit these handles to any blades in our inventory for you, handle sales are individual only
Length: 140mm
Weight: 55g
Fancy up your kitchen knives with a custom handle! This stunning Octagon handle is crafted from Mausoleum Wood and Blonde Buffalo Horn, and is suitable for Gyuto 210mm blades. This double-blonde combination looks fantastic on any blade finish, dark or light.
Handles are made from natural timber and as such can vary in tone, grain, and general appearance. Some are lighter/darker than others.
Merch Information
We've updated our merchandise now featuring our logo on the front.
Shirt Specs
AS Colour - 5130 Mens United Crew
Regular Fit
Pullover crew, inset sleeves
Heavy weight, 350 GSM
80% cotton, 20% recycled polyester anti-pill fleece
Sleeve cuff ribbing, preshrunk to minimise shrinkage
FINAL STOCK - this item will not be getting restocked after sold out.
Accessories Information
– Plastic blade guard with felt lining
– 30cm length, 5cm height
– Most suited to 27/30cm chef knives
Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.
*Logo may vary from item pictured*
Knife Information
Who doesn't want a whale knife? Hand-forged carbon steel with soft iron clad. A perfect utility/chopper with great edge retention.
STEEL BREAKDOWN – Blue Steel is a traditional high-carbon steel made by Hitachi Metals in Japan. It is the favourite steel of many knife makers and chefs across the world for its fantastic edge holding ability, toughness, and ease of sharpening. It contains few stainless elements, and as such will develop a patina, and develop rust spots if left wet after use. It requires a little more care and maintenance than something like VG-10 (Stainless Steel), so consider this when purchasing a Blue Steel knife as your first Japanese knife.
Specifications
Style: | Utility |
Edge Length: |
58mm |
Food-safe Camellia Oil is the most natural way to ensure carbon steel knives do not rust during storage. Camellia is a very light oil, and when applied creates a barrier between your knife and moisture which may rust or damage your blade. It does not affect glue or finishes on your knives.
Knife Information
A classy, cleverly designed bread knife made by Suncraft in Japan. The 2 alternating types of serrations make for easy cutting of bread of all kinds. The deserving winner of the Good Design Awards for kitchenware.
Style: | Bread Knife - Left handed |
Blade Length: | 210mm |
Weight: | 113g |
Blade Material: | Stainless Steel |
The 'Ever Peeler' took a lot of time and planning, after comparing over 200 types of peelers from around the world before the final design was settled on. Completely made in Japan this peeler can not only peel potatoes and carrots but is able to shred cabbage too. Crafted to have the sharpest possible blade and also durability of that sharpness has resulted in a peeler of the highest quality.
To reduce wastage the creators of the 'Ever Peeler' also made replaceable blades available so your peeler can be restored with a new blade if needed.
These replacement blades are only compatible with the Suncraft Ever Peelers.
To reduce wastage the creators of the 'Ever Peeler' also made replaceable blades available so your peeler can be restored with a new blade if needed.
The 'Ever Peeler' took a lot of time and planning, after comparing over 200 types of peelers from around the world the final design was settled on. Completely made in Japan this peeler can not only peel potatoes and carrots but is able to shred cabbage too. Crafted to have the sharpest possible blade and also durability of this sharpness has resulted in a peeler of the highest quality.
Specifications
Style: | Petty |
Blade Length: | 130mm |
Overall Length: | 270mm |
Weight: | 63g |
Blade Height @ Heel: | 30mm |
Bevel: | Double Bevel |
Spine Thickness @ Mid: | 1.8mm |
Blade Material: | Ginsan Core, Migaki Soft Stainless Clad |
Handle Material: | Octagon Oak |
Specifications
Style: | Butchery Cleaver |
Blade Length: | 182mm |
Overall Length: | 318mm |
Weight: | 569g |
Blade Height @ Heel: | 86mm |
Bevel: | Double Bevel |
Spine Thickness : | 3.4mm |
Accessories Information
Includes
- Yoshoku 1000/3000 Grit Deluxe Combination Stone (soak for 5-10minutes before use)
- Approx. stone dimensions: 180mm x 60mm x 30mm
- Guide Clip (Consider applying masking tape to the knife to reduce potential risk of scratching)
- Nagura Stone (flattening stone)
- Bamboo holder with rubber nonslip base
- Suitable for VG10, AUS8 & softer stainless applications
- Best paired with a lapping stone/plate for flatting between use
- Entry level stone