246 products
246 products
Sort by:
Accessories Information
The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.
This full progression includes the 320, 500, 1000, 3000, 6000, 8000, and 16000 grit stones, plus a holder.
Accessories Information
– Plastic blade guard with felt lining
– 22cm length
– Most suited to 18cm to 21cm chef knives
Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.
*Logo may vary from item pictured*
Accessories Information
The GlassStone series of sharpening stones uses a revolutionary design to provide great usability within a thin package formed from a combination of glass layers. The conventional image is that sharpening stones are large and heavy, but GlassStones are not only thin and light, but also strong, as layers of tempered glass are stuck together. GlassStones therefore have strong resistance to cracking or sudden breakage caused by external shocks such as being dropped.
Shapton stones do not need to be soaked except the very first time after purchase. We do recommend that on first use, you pre-soak the stone in water for five to six minutes to secure even smoother sharpening. Shapton stones do not need a Nagura Stone, and lapping with a Nagura Stone will leave the surface rough and ragged.
- Overall size: 210 x 70 x 10mm
- Abrasive layer: 5mm
- Micron: 29.4
- Mesh: 500
- 360g
Knife Information
1894- Mr. Tasaburo Shigematsu, a hardware wholesaler, introduced a new pocket knife with its blade and sheath folded by installing a small handle “Chikiri (tail)” on the blade, while inspired by the knife he brought back from Kagoshima.
He named it “Higonokami Knife” because many of his customers were in Kumamoto area (formally Higo country), which turned out to dramatically increase his sales. The blades have gradually changed their shapes. Unlike single-edged knives, the double-edged blades (V-shaped cross section) were in those days considered common. The earlier blades had a sharper tip (shape of a bamboo leaf), but now they have square shapes. The sheaths had a vertically folding style and a cross folding style, now the vertical one has to be custom made.
In 1911, at the First Kobe Export Articles Competitive Exhibition, Crown Prince (later Emperor Taisho) liked Higonokami on display very much and bought one, which is said to have helped its fame further spread.
The Higonikami is a fantastic traditional utility knife at a low cost.
Specifications
Style: | Higonokami |
Blade Length: | 70mm |
Weight: | 32g |
Bevel: | Double Bevel |
Blade Material: | VG10 Stainless Steel |
Handle Material: | Custom Engraved Quince Burl |
Accessories Information
Suehiro is Japanese-made and some of the most popular in the market due to their consistent quality and excellent performance. We find the stones to have excellent feedback and even wear.
– Combination 1000/6000 grit for dull knives or moderate/small chip repair followed by polishing
– Includes a sturdy plastic base with rubber feet
– Includes small Nagura stone
- 175mm x 60mm x ~11-14mm (per grit)
– 950g weight
Put ground coffee in the strainer and slowly pour in water to brew. Leave in your refrigerator for about eight hours to brew.
Colour: Black
Width: 8.7 cm
Depth: 8.4 cm
Height: 30 cm
Diameter: 7.1 cm
Capacity: 650ml
Weight: 0.5kg
Material: Heatproof glass pot. Polyester resin filter. Polypropylene strainer. Silicone bottle spout and stopper
Full instructions: https://global.hario.com/product/FIC-70.pdf
Accessories Information
Suehiro are Japanese-made whetstones and some of the most popular in the market due to their consistent quality and excellent performance. We find the stones to have excellent feedback and even wear.
– Combination 1000/3000 grit for dull knives or moderate/small chip repair followed by finishing
– Includes sturdy plastic base with rubber feet
– Includes small Nagura stone
- 175mm x 60mm x ~11-14mm (per grit)
– 950g weight
About the Natsuya
The Binsui is a natural whetstone used at the start of a natural stone progression. They are of slighter higher hardness and are fast cutting.
All natural stone sales are final, we try to provide the best possible representation of the stone via our images.
*Available to Australian customers only - International customers please contact us to purchase*
Accessory Information
The Atoma Diamond Lapping Plates by Tsuboman Japan are widely recognised as the superior solution for flattening your whetstones. Strong, sturdy, and weighing in at just shy of 700g, these will make light work of even the hardest stones.
– Low 140 Grit for fast removal of stone surface
– Integrated handle makes flattening incredibly fast & easy
– Replaceable abrasive sheet
- 7.5cm x 21cm plate size
Knife Information
1894- Mr. Tasaburo Shigematsu, a hardware wholesaler, introduced a new pocket knife with its blade and sheath folded by installing a small handle “Chikiri (tail)” on the blade, while inspired by the knife he brought back from Kagoshima.
He named it “Higonokami Knife” because many of his customers were in Kumamoto area (formally Higo country), which turned out to dramatically increase his sales. The blades have gradually changed their shapes. Unlike single-edged knives, the double-edged blades (V-shaped cross section) were in those days considered common. The earlier blades had a sharper tip (shape of a bamboo leaf), but now they have square shapes. The sheaths had a vertically folding style and a cross folding style, now the vertical one has to be custom made.
In 1911, at the First Kobe Export Articles Competitive Exhibition, Crown Prince (later Emperor Taisho) liked Higonokami on display very much and bought one, which is said to have helped its fame further spread.
The Higonikami is a fantastic traditional utility knife at a low cost.
Specifications
Style: | Higonokami Key Chain |
Blade Length: | 35mm |
Weight: | 14g |
Bevel: | Double Bevel |
Blade Material: | Aogami (Blue) Steel |
Handle Material: | Brass |
Knife Information
1894- Mr. Tasaburo Shigematsu, a hardware wholesaler, introduced a new pocket knife with its blade and sheath folded by installing a small handle “Chikiri (tail)” on the blade, while inspired by the knife he brought back from Kagoshima.
He named it “Higonokami Knife” because many of his customers were in Kumamoto area (formally Higo country), which turned out to dramatically increase his sales. The blades have gradually changed their shapes. Unlike single-edged knives, the double-edged blades (V-shaped cross section) were in those days considered common. The earlier blades had a sharper tip (shape of a bamboo leaf), but now they have square shapes. The sheaths had a vertically folding style and a cross folding style, now the vertical one has to be custom made.
In 1911, at the First Kobe Export Articles Competitive Exhibition, Crown Prince (later Emperor Taisho) liked Higonokami on display very much and bought one, which is said to have helped its fame further spread.
The Higonikami is a fantastic traditional utility knife at a low cost.
Specifications
Style: | Higonokami |
Blade Length: | 92mm |
Weight: | 70g |
Bevel: | Double Bevel |
Blade Material: | Laminated SK Carbon Steel |
Handle Material: | Black Nickel |
About the Natsuya
The Amakusa is a natural whetstone used at the start of a natural stone progression. They are of slighter higher hardness and are fast cutting.
All natural stone sales are final, we try to provide the best possible representation of the stone via our images.
*Available to Australian customers only - International customers please contact us to purchase*