102 products
102 products
Sort by:
Accessories Information
– Plastic blade guard with felt lining
– 16cm length
– Most suited to 12-15cm chef knives
Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.
*Logo may vary from item pictured*
Accessories Information
– Plastic blade guard with felt lining
– 27cm length
– Most suited to 24cm chef knives
Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.
*Logo may vary from item pictured*
Accessories Information
Includes
- Yoshoku 1000/6000 Grit Deluxe Combination Stone (soak for 5-10 minutes before use)
- Approx. stone dimensions: 180mm x 60mm x 30mm
- Guide Clip
- Nagura Stone (flattening stone)
- Bamboo holder with rubber nonslip base
Accessories Information
Includes
- Yoshoku 1000/3000 Grit Deluxe Combination Stone (soak for 5-10minutes before use)
- Approx. stone dimensions: 180mm x 60mm x 30mm
- Guide Clip
- Nagura Stone (flattening stone)
- Bamboo holder with rubber nonslip base
- Suitable for VG10, AUS8 & softer stainless applications
Accessories Information
– Plastic blade guard with felt lining
– 30cm length
– Most suited to 27/30cm chef knives
Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.
*Logo may vary from item pictured*
Accessories Information
- Guide Clip
- Clip to the spine of your knife to maintain a consistent sharpening angle
Accessories Information
Heavy duty, sturdy rubber-based whetstone holder.
– Sturdy stainless steel and rubber construction
– Heavy Duty Locking Screw
– Holds stones from 73mm to 218mm in length
– Weight: 577g
Accessories Information
Porter Smal Double-Sided Strop, the essential last step of deburring the edge of your knife to ensure maximum sharpness.
– Dual Sided Leather
– Shaped handle for ease of use
– Green Compound included
– 180mm Leather Length
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #320 Coarse (Only for stubborn steel or small repairs)
Weight:
Dimensions:
Accessories Information
Porter Large Double-Sided Strop, the essential last step of deburring the edge of your knife to ensure maximum sharpness.
– Dual Sided Leather
– Shaped handle for ease of use
– Green Compound included
– 330mm Leather Length
– Tapered end
Accessories Information
One of the best whetstone holders money can buy. Heavy duty, sturdy, and of the highest quality.
– Sturdy stainless steel and rubber construction
– Heavy Duty Locking Screw
– Holds stones from 150mm to 250mm in length
Accessories Information
- 500 Grit Nagura Stone
- Cleaning and flattening Yoshoku Whetstone
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #8000 Very Fine (For honing or edge polishing, use after the 5000)
Weight:
Dimensions:
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #120 Very Coarse (Only for larger repairs)
Weight:
Dimensions:
Accessories Information
The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.
- Overall size: 210 x 70 x 10mm
- Micron: 4
-
Mesh: 3000
- No Case Included
Accessories Information
The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.
- Overall size: 210 x 70 x 10mm
- Micron: 25
-
Mesh: 500
Accessories Information
The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.
- Overall size: 210 x 70 x 10mm
- Micron: 2
-
Mesh: 6000
- No Case Included
Accessories Information
The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.
- Overall size: 210 x 70 x 10mm
- Micron: 40
-
Mesh: 320
When you're trying to achieve an ultra-precise edge, the slightest wobble or vibration can result in distortions in the blade. The GS Holder is heavy enough to use as a sharpening base, and its form gives it stability far higher than that of the GS Field Holder.
- Dimensions: 259 x 86 x 56mm
- Weight: approx. 1,960g