When it comes to sharpening, stability makes all the difference. You could wrestle with a stone that moves around on you, or you could use this tool to keep it secure, making the process safer and more enjoyable.

This sink bridge takes sharpening setups to the next level. It offers an easy way to access water while keeping cleanup simple. With adjustable grips to fit nearly any sink and hold stones of all sizes, it’s a versatile and reliable solution for any sharpening task.

Width: 83mm

Smallest and largest sink: 280mm to 430mm

Maximum stone length : 215mm 

Accessories Information

A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.  

• Coarse Whetstone (Used for bevel flattening, large chip repair, complete edge refurbishing)
  
• Size: 210 x 75 x 26mm
• 880g

Accessories Information

This 500/1000/4000 kit is the perfect bundle to move more stubborn steels like SG2 or HAP40, or for minor chip repairs, as well as for keeping both carbon and stainless knives in top condition. A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.  

• Size: 210 x 75 x 26mm
• 840g

Accessories Information

This 500/1000/4000/6000 kit is the perfect bundle to move more stubborn steels like SG2 or HAP40, or for minor chip repairs, as well as for taking carbon and stainless edges to a more refined 6000 finish. A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.  

• Size: 210 x 75 x 26mm
• 840g

Accessories Information

The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.  

• Overall size: 210 x 70 x 10mm
• Micron: 25
• Mesh: 500
  

Accessories Information

• 500 Grit Nagura Stone
• Cleaning and flattening Yoshoku Whetstone

Accessories Information

The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.  

• Overall size: 210 x 70 x 10mm
• Micron: 40
• Mesh: 320
  
• No Case Included

An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.

Dimensions of stone - 210 x 70 x 10mm

Made In Japan

Accessories Information

The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.  

• Overall size: 210 x 70 x 10mm
• Micron: 40
• Mesh: 320
  

Accessories Information

One of the best whetstone holders money can buy. Heavy duty, sturdy, and of the highest quality. 
– Sturdy stainless steel and rubber construction 
– Heavy Duty Locking Screw
– Holds stones from 150mm to 250mm in length

Accessories Information

The GlassStone series of sharpening stones uses a revolutionary design to provide great usability within a thin package formed from a combination of glass layers. The conventional image is that sharpening stones are large and heavy, but GlassStones are not only thin and light, but also strong, as layers of tempered glass are stuck together. GlassStones therefore have strong resistance to cracking or sudden breakage caused by external shocks such as being dropped.

Shapton stones do not need to be soaked except the very first time after purchase. We do recommend that on first use, you pre-soak the stone in water for five to six minutes to secure even smoother sharpening. Shapton stones do not need a Nagura Stone, and lapping with a Nagura Stone will leave the surface rough and ragged.

• Overall size: 210 x 70 x 10mm
• Abrasive layer: 5mm
• Micron: 29.4
• Mesh: 500
• 360g

The GS Field Holder is designed to store three Shapton GlassStones neatly. When turned over, it can also be used as a sharpening base.

Dimensions: 253 x 80 x 53mm

Weight: approx. 640g

Accessories Information

The GlassStone series of sharpening stones uses a revolutionary design to provide great usability within a thin package formed from a combination of glass layers. The conventional image is that sharpening stones are large and heavy, but GlassStones are not only thin and light, but also strong, as layers of tempered glass are stuck together. GlassStones therefore have strong resistance to cracking or sudden breakage caused by external shocks such as being dropped.

Shapton stones do not need to be soaked except the very first time after purchase. We do recommend that on first use, you pre-soak the stone in water for five to six minutes to secure even smoother sharpening. Shapton stones do not need a Nagura Stone, and lapping with a Nagura Stone will leave the surface rough and ragged.

• Overall size: 210 x 70 x 10mm
• Abrasive layer: 5mm
• Micron: 4.9
• Mesh: 3000
• 360g

Accessory Information

The Atoma Diamond Lapping Plates by Tsuboman Japan are widely recognised as the superior solution for flattening your whetstones. Strong, sturdy, and weighing in at 600g, these will make light work of even the hardest stones.

– Low 140 Grit for very fast removal of stone surface
– Replaceable abrasive sheet

An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.

Dimensions of stone - 210 x 70 x 10mm

Made In Japan

An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.

Dimensions of stone - 210 x 70 x 10mm

Made In Japan

An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.

Dimensions of stone - 210 x 70 x 10mm

Made In Japan

Accessories Information

The GlassStone series of sharpening stones uses a revolutionary design to provide great usability within a thin package formed from a combination of glass layers. The conventional image is that sharpening stones are large and heavy, but GlassStones are not only thin and light, but also strong, as layers of tempered glass are stuck together. GlassStones therefore have strong resistance to cracking or sudden breakage caused by external shocks such as being dropped.

Shapton stones do not need to be soaked except the very first time after purchase. We do recommend that on first use, you pre-soak the stone in water for five to six minutes to secure even smoother sharpening. Shapton stones do not need a Nagura Stone, and lapping with a Nagura Stone will leave the surface rough and ragged.

The Chocera are one of Naniwa's premium whetstone offerings. Similar to the Shapton Glass but with better feedback, albeit a slightly faster wear rate. A thick, firm, high-end stone perfect for all steel stypes and applications.

Dimensions of stone - 210 x 70 x 20

Made In Japan

The Chocera are one of Naniwa's premium whetstone offerings. Similar to the Shapton Glass but with better feedback, albeit a slightly faster wear rate. A thick, firm, high-end stone perfect for all steel stypes and applications.

Dimensions of stone - 210 x 70 x 20

Made In Japan

Accessories Information

The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.  

• Overall size: 210 x 70 x 10mm
• Micron: 4
• Mesh: 3000
  
• No Case Included

If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time. 

Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value. 

Grit: #320 Coarse (Only for stubborn steel or small repairs)

Weight:

Dimensions:  

When you're trying to achieve an ultra-precise edge, the slightest wobble or vibration can result in distortions in the blade. The GS Holder is heavy enough to use as a sharpening base, and its form gives it stability far higher than that of the GS Field Holder.

Dimensions: 259 x 86 x 56mm

Weight: approx. 1,960g

Accessory Information

The Atoma Diamond Lapping Plates by Tsuboman Japan are widely recognised as the superior solution for flattening your whetstones. Strong, sturdy, and weighing in at just shy of 700g, these will make light work of even the hardest stones.

*Replacement Sheet only with adhesive backing*

Accessories Information

The GlassStone series of sharpening stones uses a revolutionary design to provide great usability within a thin package formed from a combination of glass layers. The conventional image is that sharpening stones are large and heavy, but GlassStones are not only thin and light, but also strong, as layers of tempered glass are stuck together. GlassStones therefore have strong resistance to cracking or sudden breakage caused by external shocks such as being dropped.

Shapton stones do not need to be soaked except the very first time after purchase. We do recommend that on first use, you pre-soak the stone in water for five to six minutes to secure even smoother sharpening. Shapton stones do not need a Nagura Stone, and lapping with a Nagura Stone will leave the surface rough and ragged.