Sort by:
189 products
189 products
Specifications
| Style: | Paring |
| Blade Length: | 90mm |
| Overall Length: | 200mm |
| Weight: | 57g |
| Blade Height @ Heel: | 24mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Mid: | 1.7mm |
| Blade Material: | VG10 Core, Stainless Clad |
| Handle Material: | Full Tang Western |
Knife Information
Yu Kurosaki is now one of the most well-known blacksmiths in Japan. He experienced a rapid rise to fame through his beautiful knife aesthetics, his thin grinds, and use of exotic steels like SG2, HAP40, and stainless-clad Blue Super. The Fujin was among one of the first lines of his that contributed to this fame. The striking Tsuchime finish is now instantly recognizable and is truly a piece to be experienced first-hand.
Best paired with a wooden saya and a 1000/6000 whetstone
Steel Breakdown
SG2 is a powder stainless steel made by The Takefu Special Steel Company in Takefu, Japan. It is, in our eyes, the ultimate combination of edge retention, stainless properties, and ease of sharpening. Having more carbon than the Carbon Steels like White and Blue, yet more stainless elements than VG10, knives using this steel are the best of both worlds without the downsides.
Knives with an SG2 core are becoming more prevalent in Japan due to these reasons. Their overall cost may be higher, but is well justified in our opinion.
Specifications
| Style: | Petty |
| Blade Length: | 120mm |
| Overall Length: | ~250mm |
| Weight: | 80g |
| Blade Height @ Heel: | 30mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 2.4mm |
| Spine Thickness @ Mid: | 2mm |
| Blade Material: | SG2 Core, Stainless Tsuchime Clad |
| Handle Material: | Octagon Rosewood |
| HRC: | ~63 |
*Available to Australian customers only*
Specifications
| Style: | Petty |
| Blade Length: | 135mm |
| Weight: | 90g |
| Blade Material: | AUS10 w/Stainless Clad |
| Handle Material: | Pakkawood w/stainless bolster |
| HRC: | 58-59 |
Specifications
| Style: | Petty |
| Blade Length: | 135mm |
| Overall Length: | 265mm |
| Weight: | 97g |
| Blade Height: | 31mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 3.2mm |
| Spine Thickness @ Mid: | 2.3mm |
| Spine Thickness 1cm from tip: | 0.9m |
| Blade Material: | SLD Core, Stainless Kurouchi Tsuchime Clad |
| Handle Material: | Octagon Bocote |
| HRC: | ~61 |
Specifications
| Style: | Petty |
| Blade Length: | 135mm |
| Overall Length: | 270mm |
| Weight: | 74g |
| Blade Height @ Heel: | 28mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Mid: | 1.9mm |
| Blade Material: | Ginsan Core, Nashiji Soft Stainless Clad |
| Handle Material: | Octagon Oak |
| HRC: | 61 |
Specifications
| Style: | Ko-Bunka |
| Blade Length: | ~130mm |
| Height @ Heel: | 46mm |
| Spine Thickness @ Mid: | 2.7mm |
| Weight: | 132g |
| Blade Material: | |
| Handle Material: | |
| HRC: | ~62-63 |
Specifications
| Style: | Petty |
| Blade Length: | 120mm |
| Weight: | 70g |
| Bevel: | Double Bevel |
| Blade Material: | VG10 Core Black Damascus Clad |
| Handle Material: | Octagon Pakkawood w/white spacer |
| HRC | 61 |
Specifications
| Style: | Paring |
| Blade Length: | 80mm |
| Weight: | 61g |
| Bevel: | Double Bevel |
| Blade Material: | VG10 Core Black Damascus Clad |
| Handle Material: | Octagon Pakkawood w/white spacer |
| HRC | 61 |
Specifications
| Style: | Petty |
| Blade Length: | 165mm |
| Overall Length: | 295mm |
| Weight: | 102g |
| Blade Height @ Heel: | 34mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 3mm |
| Spine Thickness @ Mid: | 1.6mm |
| Spine Thickness 1cm from tip: | 0.9mm |
| Blade Material: | White 2 Core, Stainless Kurouchi Clad |
| HRC: | 61-62 |
| Handle Material: | Octagon Ebony |
Knife Information
A relatively young but masterful blacksmith, Shigeki Tanaka crafts his knives in a workshop in Miki City, Japan. Known for being skillful and creative, he works with almost all knifemaking steels, from high carbon like Aogami, to powder stainless steel. His range of R2/SG2 Black Damascus had our jaws on the floor when we received our first shipment from him!
The first thing we noted was the impeccable presentation. A Palownia wooden box houses all his R2 knives and is lined with red velvet. The etching of these blades has left a dark, misty, striking Damascus pattern, and are dressed in Walnut handles. Beautifully thin grinds ensure fantastic cutting performance, and 64HRC guarantees phenomenal edge retention
Specifications
| Style: | Petty |
| Blade Length: | 135mm |
| Overall Length: | 264mm |
| Weight: | 63g |
| Blade Height @ Heel: | 31mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Mid: | 1.4mm |
| Blade Material: | R2/SG2 Black Damascus |
| Handle Material: | Octagon Walnut |
| HRC: | ~64 |
Specifications
| Style: | Kiritsuke Petty |
| Blade Length: | 150mm |
| Overall Length: | 280mm |
| Height @ Heel: | 33mm |
| Spine Thickness @ Mid: | 2mm |
| Weight: | 85g |
| Blade Material: | SG2 Core, Stainless Clad |
| Handle Material: | Octagon Rosewood/Pakka |
| HRC: | ~63 |
Specifications
| Style: | Petty |
| Blade Length: | 145mm |
| Overall Length: | 273mm |
| Height @ Heel: | 31mm |
| Spine Thickness @ Mid: | 2.5mm |
| Weight: | 93g |
| Blade Material: | Blue 1 Core, Soft Iron Damascus Clad |
| Handle Material: | Oak Octagon |
| HRC: | ~63-64 |
Chef's Edge
We pride ourselves on offering an unparalleled selection of Japanese knives. From the versatile Gyuto and the precise Santoku to specialized knives like the Nakiri and Yanagiba, each knife is handpicked for its quality and performance.