Sort by:
2007 products
2007 products
Specifications
| Style: | Sujihiki |
| Blade Length: | 230mm |
| Overall Length: | 385mm |
| Height @ Heel: | 36mm |
| Spine Thickness @ Mid: | 3mm |
| Weight: | 126g |
| Blade Material: | Blue 1 Core, Soft Iron Damascus Clad |
| Handle Material: | Oak Octagon |
| HRC: | ~63-64 |
Specifications
| Style: | Sujihiki |
| Blade Length: | 261mm |
| Overall Length: | 390mm |
| Height @ Heel: | 37mm |
| Spine Thickness @ Mid: | 3mm |
| Weight: | 114g |
| Blade Material: | Blue 1 Core, Soft Iron Damascus Clad |
| Handle Material: | Oak Octagon |
| HRC: | ~63-64 |
~170mm Ginsan w/Stainless Clad Bunka Knife
Specifications
| Style: | Bunka |
| Blade Length: | ~170mm |
| Height @ Heel: | 45mm |
| Spine Thickness @ Mid: | 2mm |
| Weight: | 127g |
| Blade Material: | Ginsan w/Stainless Clad |
| Handle Material: | Octagon Charred Oak |
| HRC: | ~62 |
Specifications
| Style: | Kiritsuke |
| Blade Length: | 210mm |
| Overall Length: | 340mm |
| Height @ Heel: | 50mm |
| Spine Thickness @ Mid: | 2.1mm |
| Weight: | 163grs |
| Blade Material: | Ginsan Core w/Stainless Clad |
| Handle Material: | Octagon Charred Oak |
| HRC: | ~62 |
Specifications
| Style: | Kiritsuke |
| Blade Length: | 230mm |
| Overall Length: | 385mm |
| Height @ Heel: | 48mm |
| Spine Thickness @ Heel/Mid | 2.5mm/2.2mm |
| Weight: | 207g |
| Blade Material: | Ginsan Core w/Stainless Clad |
| Handle Material: | Octagon Charred Oak |
| HRC: | ~62 |
Specifications
| Style: | Kiritsuke Petty |
| Blade Length: | 140mm |
| Overall Length: | 270mm |
| Height @ Heel: | 32mm |
| Spine Thickness @ Mid: | 1.7mm |
| Weight: | 78g |
| Blade Material: | Ginsan w/Stainless Clad |
| Handle Material: | Octagon Charred Oak |
| HRC: | ~62 |
Specifications
| Style: | Bunka |
| Blade Length: | ~170mm |
| Height @ Heel: | 45mm |
| Spine Thickness @ Mid: | 2mm |
| Weight: | 127g |
| Blade Material: | SG2 w/ Stainless Tsuchime Clad |
| Handle Material: | Octagon Ebony w/Blonde |
| HRC: | ~63 |
Specifications
| Style: | Bunka |
| Blade Length: | ~170mm |
| Height @ Heel: | 45mm |
| Spine Thickness @ Mid: | 2mm |
| Weight: | 127g |
| Blade Material: | SG2 w/ Stainless Tsuchime Clad |
| Handle Material: | Octagon Ebony w/Blonde |
| HRC: | ~63 |
Specifications
| Style: | Kiritsuke |
| Blade Length: | ~170mm |
| Height @ Heel: | 45mm |
| Spine Thickness @ Mid: | 2mm |
| Weight: | 127g |
| Blade Material: | Ginsan w/Stainless Clad |
| Handle Material: | Octagon Charred Oak |
| HRC: | ~62 |
Specifications
| Style: | Ko-Bunka |
| Blade Length: | ~130mm |
| Height @ Heel: | 46mm |
| Spine Thickness @ Mid: | 2.7mm |
| Weight: | 132g |
| Blade Material: | |
| Handle Material: | |
| HRC: | ~62-63 |
This benchtop holder allows you to easily and safely store your knives on a magnetized pad whilst keeping your knives on display. *Knives not included*
Most suited for WA-handled knives, heavier handles may cause the knife to sit on an angle (e.g. western handle and full metal handle knives).
Knife pad size: 72mm wide at top x 100mm wide at base x 311mm high.
Total holder measurements: 143mm wide x 165mm deep x 350mm high.
This benchtop holder allows you to easily and safely store your knives on a magnetized pad whilst keeping your knives on display. *Knives not included*
Most suited for WA-handled knives, heavier handles may cause the knife to sit on an angle (e.g. western handle and full metal handle knives).
Knife pad size: 72mm wide at top x 100mm wide at base x 311mm high.
Total holder measurements: 143mm wide x 165mm deep x 350mm high.
The Maple Magnetic Knife Holder is a minimal and elegant knife display and storage solution for those who may not have room for bulky knife blocks that take up vital bench space.
– Maple timber construction
– Strong adhesive strips runs along entire back of holder, or hang with 2 screws
– Powerful Neodymium Magnets
– 40cm L x 2cm W x 6.5cm H
- Knives not included
Adhesive Strip installation information; ensure wall is level and free of oil or dirt prior to the use of adhesive strips. After adhering the wall holder is recommended to wait 24hrs before placing knives on.
*Chefs Edge is not liable for any damage caused to knives or property while using the magnetic holder*
Double thickness, heavy-duty canvas knife roll.
- Elastic loops
- 6 slots for knives/tools
- Steel rings
- Fits knives with an overall length of 430mm
- Pocket width 65mm
- Unfolded measurements: 650mm tall x 590mm wide
This benchtop holder allows you to easily and safely store your knives on a double sided magnetized pad whilst keeping your knives on display. *Knives not included*
Most suited for WA-handled knives, heavier handles may cause the knife to sit on an angle (e.g. western handle and full metal handle knives).
Total Width: 235mm
Total Depth: 115mm
Weight: 2.6kg
Usable face area: 310mm H x 210mm W
This benchtop holder allows you to easily and safely store your knives on a double sided magnetized pad whilst keeping your knives on display. *Knives not included*
Most suited for WA-handled knives, heavier handles may cause the knife to sit on an angle (e.g. western handle and full metal handle knives).
Total Width: 235mm
Total Depth: 115mm
Weight: 2.6kg
Usable face area: 310mm H x 210mm W
This thoughtfully crafted holder is made from Walnut wood and stained black and allows you to easily and safely store your knives up to 210mm on a benchtop with a small footprint, whilst being able to see the blades through the open-sided design.
Before purchasing please ensure your knives will fit with the provided dimensions. Knives that are thicker, longer, or taller than the provided dimensions will not fit in the holder. Chefs Edge will not accept responsibility if your knives don't fit in the holder. *Holder will not fit Deba, Cleaver, or any other non-traditionally shaped blades*
Inner void for knife: 4mm wide x 65mm deep x 225mm high.
Total exterior measurements: 80mm wide x 130mm deep x 265mm high.
*Knife Not Included* This thoughtfully crafted holder is made from Walnut wood and allows you to easily and safely store your knives on a benchtop with a small footprint, whilst being able to see the blades through the open-sided design.
Before purchasing please ensure your knives will fit with the provided dimensions. Knives that are thicker, longer, or taller than the provided dimensions will not fit in the holder. Chefs Edge will not accept responsibility if your knives don't fit in the holder.
Inner void for knife: 4mm wide x 65mm deep x 225mm high.
Total exterior measurements: 80mm wide x 130mm deep x 265mm high.
Don't scrape your knife along the board to scoop ingredients into your hand, just use the scoop! Once you use the food scoop, you'll wonder how you ever got by without one. We use ours every single meal we cook. Keeps your fingers safe and your knife edges sharp.
Chef's Edge
We pride ourselves on offering an unparalleled selection of Japanese knives. From the versatile Gyuto and the precise Santoku to specialized knives like the Nakiri and Yanagiba, each knife is handpicked for its quality and performance.
